Land Rover Forums - Land Rover Enthusiast Forum
Water in the bins
Water in the bins
0 2020/09/19 12:55:32
Evidence of leakage on the trim (washed off my 303 protectant)
Evidence of leakage on the trim (washed off my 303 protectant)
0 2020/09/19 12:55:26
This is the drip I spied, by the right rear 2nd row seat belt.
This is the drip I spied, by the right rear 2nd row seat belt.
0 2020/09/19 12:55:20
0 2020/09/12 09:20:39
2 chips way up / down on the spokes (top center and on the 4pm spoke)
2 chips way up / down on the spokes (top center and on the 4pm spoke)
0 2020/08/30 22:35:38
Zero of this before the last balance
Zero of this before the last balance
0 2020/08/30 22:35:26
0 2020/08/29 13:27:47
With relocation bracket and 265/60/R18
With relocation bracket and 265/60/R18
0 2020/08/14 12:16:39
With relocation bracket and 265/60/R18
With relocation bracket and 265/60/R18
0 2020/08/14 12:16:29
Bit further out, but it's a bit wider too.
Bit further out, but it's a bit wider too.
0 2020/08/13 21:12:53
0 2020/08/13 21:06:34
3 spacers I didn't use as I cut the studs/threads shorter. Nice aluminum bits, will find something else for them to do!
3 spacers I didn't use as I cut the studs/threads shorter. Nice aluminum bits, will find something else for them to do!
0 2020/08/13 21:06:27
0 2020/08/13 21:06:18
0 2020/08/13 21:06:10
0 2020/08/13 21:06:02
0 2020/08/13 21:05:56
Looks good and lined up the center cap and valve
Looks good and lined up the center cap and valve
0 2020/08/13 21:05:49
0 2020/08/13 21:05:43
0 2020/08/13 21:05:36
You can see the 3 studs cut off here. I measured 15/16" from the stock mount and it was perfect. Flush with end of lock nut. BTW smart instructions said to thread the nut on before cutting, which was good bc it helps make sure the threads "fix" from any poor dremeling/cutting. Which I definitely had some of...
You can see the 3 studs cut off here. I measured 15/16" from the stock mount and it was perfect. Flush with end of lock nut. BTW smart instructions said to thread the nut on before cutting, which was good bc it helps make sure the threads "fix" from any poor dremeling/cutting. Which I definitely had some of...
0 2020/08/13 21:03:23
0 2020/08/13 21:02:24
0 2020/08/13 21:02:18
0 2020/08/13 21:01:24
0 2020/08/13 20:59:54
0 2020/08/13 20:59:48
Rear 265/60/R18 stock suspension (103K mi on truck)
Rear 265/60/R18 stock suspension (103K mi on truck)
0 2020/08/13 20:55:57
Fronts look good 265/60/R18 stock suspension (103K mi on truck)
Fronts look good 265/60/R18 stock suspension (103K mi on truck)
0 2020/08/13 20:55:50
Love the sidewalls. Tire shop didn't scuff one wheel and used inside weights
Love the sidewalls. Tire shop didn't scuff one wheel and used inside weights
0 2020/08/13 20:55:44
From the tire store to Lowe's to get rivets for another project
From the tire store to Lowe's to get rivets for another project
0 2020/08/13 20:55:36
0 2020/08/13 20:47:31
Rear 265/60/R18
Rear 265/60/R18
0 2020/08/13 20:43:21
Front 265/60/R18
Front 265/60/R18
0 2020/08/13 20:43:13
Love the sidewalls. The shop didn't scuff wheels and they used inside weights.
Love the sidewalls. The shop didn't scuff wheels and they used inside weights.
0 2020/08/13 20:43:06
265/60/R18 is bit more rugged on a stocker truck like this, but not crazy
265/60/R18 is bit more rugged on a stocker truck like this, but not crazy
0 2020/08/13 20:42:59
0 2020/08/12 21:38:02
FINISHED !
FINISHED !
0 2020/08/11 22:25:55
Almost done, just the passenger A Pillar to go.
Almost done, just the passenger A Pillar to go.
0 2020/08/11 22:25:49
Here you can see the rain gutter removed. Why, I don't know. I should have had it back on. I forgot.
Here you can see the rain gutter removed. Why, I don't know. I should have had it back on. I forgot.
0 2020/08/11 22:23:49
Did it correctly on this side.
Did it correctly on this side.
0 2020/08/11 22:22:47
Drivers side. I did A pillar first. So, I just cut off the bottom of the rain gutter piece and slid it on. It should be rain gutter piece, then A pillar.
Drivers side. I did A pillar first. So, I just cut off the bottom of the rain gutter piece and slid it on. It should be rain gutter piece, then A pillar.
0 2020/08/11 22:21:44