Windshield cowl filter idea
#1
Windshield cowl filter idea
2004 Disco II-
Here's an idea for those of us with a crumbled or missing foam insert piece for your windshield cowl/air intake piece.
I had a broken windshield cowl piece and finally located one from B&R Salvage for $60. But when it arrived it was missing the foam air filter insert that runs the length of the cowl. I went down to Home Depot and got a $10 electrostatic air filter, the kind that fits on your air exchange in your house. It is about ½ " thick, green on one side black on the other. Cut some 1" strips and inserted them in the new cowl piece, and have lots left over for next time I need to replace it.
Here's an idea for those of us with a crumbled or missing foam insert piece for your windshield cowl/air intake piece.
I had a broken windshield cowl piece and finally located one from B&R Salvage for $60. But when it arrived it was missing the foam air filter insert that runs the length of the cowl. I went down to Home Depot and got a $10 electrostatic air filter, the kind that fits on your air exchange in your house. It is about ½ " thick, green on one side black on the other. Cut some 1" strips and inserted them in the new cowl piece, and have lots left over for next time I need to replace it.
The following users liked this post:
JUKE179r (11-26-2016)
#2
2004 Disco II-
Here's an idea for those of us with a crumbled or missing foam insert piece for your windshield cowl/air intake piece.
I had a broken windshield cowl piece and finally located one from B&R Salvage for $60. But when it arrived it was missing the foam air filter insert that runs the length of the cowl. I went down to Home Depot and got a $10 electrostatic air filter, the kind that fits on your air exchange in your house. It is about ½ " thick, green on one side black on the other. Cut some 1" strips and inserted them in the new cowl piece, and have lots left over for next time I need to replace it.
Here's an idea for those of us with a crumbled or missing foam insert piece for your windshield cowl/air intake piece.
I had a broken windshield cowl piece and finally located one from B&R Salvage for $60. But when it arrived it was missing the foam air filter insert that runs the length of the cowl. I went down to Home Depot and got a $10 electrostatic air filter, the kind that fits on your air exchange in your house. It is about ½ " thick, green on one side black on the other. Cut some 1" strips and inserted them in the new cowl piece, and have lots left over for next time I need to replace it.
Cut strips, sell each strip on ebay for 10 bucks!
The following 2 users liked this post by Charlie_V:
PD2004USSalty (11-13-2022),
TinyAvenger (05-15-2016)
Thread
Thread Starter
Forum
Replies
Last Post
collin Barrows
Audio/Visual Electronics
2
08-22-2011 10:22 PM