electrical schematic for Range Rover Sport 2006
#1
08-27-2014, 11:44 AM
electrical schematic for Range Rover Sport 2006
Gang, I am looking for a schematic of the electrics in the center console. I am also trying to figure out how to get the dashboard off, but that will be the subject of another post. I have photos, I will try to upload.
I have stripped the interior of the 2006 Range Rover Sport, except for parts of the dash, still working on that. Seats, carpets, rear panels that cover the tools, center console, most of the dash. Glove boxes, radio, nav screen, climate controls, lock, emergency flasher panel, lower dash covers, etc. The instrument cluster bolts are off, but the IC will not budge, seems to be stuck. Had some rats take up residency. I threw out the carpet and some other bits that were too stinky to keep. I have a replacement carpet set coming from a dismantler, about $250. Seats look perfect and seem to be alright.
I have some cut wires (chewed, rats seem to like the color yellow for some reason.....) in the center console area, parking brake, air suspension controls, transmission gear selector and the cooler. That explains why I was getting codes and lights related to the parking brake, the air suspension and the gear selector.......I also could not get the cooler to turn on. A few other wires, a couple at the base of both B pillars and a couple at the fuse panel near the pollen filter behind the lower glove box, but those seem to be straight forward to figure out.
I have stripped the interior of the 2006 Range Rover Sport, except for parts of the dash, still working on that. Seats, carpets, rear panels that cover the tools, center console, most of the dash. Glove boxes, radio, nav screen, climate controls, lock, emergency flasher panel, lower dash covers, etc. The instrument cluster bolts are off, but the IC will not budge, seems to be stuck. Had some rats take up residency. I threw out the carpet and some other bits that were too stinky to keep. I have a replacement carpet set coming from a dismantler, about $250. Seats look perfect and seem to be alright.
I have some cut wires (chewed, rats seem to like the color yellow for some reason.....) in the center console area, parking brake, air suspension controls, transmission gear selector and the cooler. That explains why I was getting codes and lights related to the parking brake, the air suspension and the gear selector.......I also could not get the cooler to turn on. A few other wires, a couple at the base of both B pillars and a couple at the fuse panel near the pollen filter behind the lower glove box, but those seem to be straight forward to figure out.
#4
08-28-2014, 05:29 PM
Yes, I do. There is virtually no traffic on the range rover board for the range rover sport. The Sport and the LR3 share the same drive train and many other parts. Thus, I posted the request here. Plus, if there is a source for the Land Rover/Range Rover electrical layout, I figured that it would have LR3 schematics as well as the Range Rover Sport schematic.
There was some thought to the request, whether it was a good thought is yet to be determined.....Phil
There was some thought to the request, whether it was a good thought is yet to be determined.....Phil
Thread
Thread Starter
Forum
Replies
Last Post