3D Print | Cargo headlining tie down
#1
3D Print | Cargo headlining tie down (only cover is printed)
Created a plate adapter to use pick up truck tie down :
link to thinkgiverse for details
Allows to use a JK/JL cargo nets :
link to thinkgiverse for details
Allows to use a JK/JL cargo nets :
Last edited by manu; 07-01-2022 at 08:48 PM.
The following 7 users liked this post by manu:
73matt (07-01-2022),
Dan Hairy (07-02-2022),
Defendit.. (07-02-2022),
GavinC (07-02-2022),
GrouseK9 (07-02-2022),
and 2 others liked this post.
#2
Brilliant! Why the factory won't offer something like this along with a 'ruggedized' cargo area with drain plugs or some such is beyond me. They could even call it something cute like the 'Expedition Cargo Pack' and charge $3K for it. I'm thinking no rear seat option for 110s, removable drain plugs to let water out in case you have to scrub a bunch of mud out of there, fully rubberized sides to make it all water proof, the air compressor, maybe the portable rinse system and then a net like you have installed here.
The following 2 users liked this post by CombatNinja:
DefenderSISU (07-07-2022),
manu (07-02-2022)
#3
#4
The following 3 users liked this post by manu:
The following users liked this post:
manu (07-02-2022)
#6