3D Print | Cargo headlining tie down
#12
07-06-2022, 09:06 AM
These were bout $12 for the pair. They also have them in black. The anchor is on a 3/8" bolt, so the wings are just a bit large to fit in the existing hole. I originally tried to customize the wings by grinding them down, and that works, but the easier fix was to just enlarge the existing hole in the metal plate. That's what I did on the second one. Both work great.
The following 3 users liked this post by Carl Dali:
#13
07-06-2022, 10:38 AM
Pro Wrench
Awesome tip, @Carl Dali ! Mine are used for the 1/2 screen back there, but I love the alternative you've discovered.
#14
07-07-2022, 12:40 AM
These were bout $12 for the pair. They also have them in black. The anchor is on a 3/8" bolt, so the wings are just a bit large to fit in the existing hole. I originally tried to customize the wings by grinding them down, and that works, but the easier fix was to just enlarge the existing hole in the metal plate. That's what I did on the second one. Both work great.
Thread
Thread Starter
Forum
Replies
Last Post
rhettp
Retired - Private For Sale/Trade Classifieds
0
07-12-2016 10:27 PM