Brake Controller
Popular Reply
Sep 7, 2020, 04:20 PM
Three Wheeling
Joined: Aug 2020
Posts: 51
Likes: 64
I installed the REDARC Tow-Pro Elite brake controller. You need the REDARC Ford/Lincoln suitable Tow-Pro Brake Controller Harness (TPH-006) as well. That harness will plug into a plug that is attached up the brake pedal. You have to remove the lower dash panel. It’s an easy job. Took me less than 30 minutes. I also used the REDARC Tow Pro Universal Mount. I installed the mount/and **** (controller) in the blank below the parking brake and dimmer.
Mudding
Joined: Oct 2011
Posts: 189
Likes: 92
Funny, I was just looking into this on Tuesday.
I'm looking at a Curt controller that is wireless. I like the functionality of it and the ease of setting it up. Its not perfect, but for the few times that I will tow it should work great.
Rob
I'm looking at a Curt controller that is wireless. I like the functionality of it and the ease of setting it up. Its not perfect, but for the few times that I will tow it should work great.
Rob
Three Wheeling
Joined: Aug 2020
Posts: 51
Likes: 64
I installed the REDARC Tow-Pro Elite brake controller. You need the REDARC Ford/Lincoln suitable Tow-Pro Brake Controller Harness (TPH-006) as well. That harness will plug into a plug that is attached up the brake pedal. You have to remove the lower dash panel. It’s an easy job. Took me less than 30 minutes. I also used the REDARC Tow Pro Universal Mount. I installed the mount/and **** (controller) in the blank below the parking brake and dimmer.
Three Wheeling
Joined: Aug 2020
Posts: 51
Likes: 64
Out of the box, the fit is a tad loose, so I used the enclosed foam to tighten things up a bit and finally added some double side 3M tape as well. It looks good and fits well. Other option would have been to drill it out the factory blank.
Thread Starter
|
Mudding
Joined: Jan 2011
Posts: 221
Likes: 188
I installed the REDARC Tow-Pro Elite brake controller. You need the REDARC Ford/Lincoln suitable Tow-Pro Brake Controller Harness (TPH-006) as well. That harness will plug into a plug that is attached up the brake pedal. You have to remove the lower dash panel. It’s an easy job. Took me less than 30 minutes. I also used the REDARC Tow Pro Universal Mount. I installed the mount/and **** (controller) in the blank below the parking brake and dimmer.
3rd Gear
Joined: Sep 2020
Posts: 3
Likes: 0
Take a couple pics on access and how to access the panel, and we can turn this into a DIY thread on the brake controller. I’m going to tackle mine in two weeks!
