Retrofitting 2024 D90 Rear Lower Seat Cushions
Thread Starter
|
Three Wheeling
Joined: Jan 2024
Posts: 57
Likes: 26
From: CO
Retrofitting 2024 D90 Rear Lower Seat Cushions
I am picking up a '22 D90 V8 next week. The only discernable difference from a '24 appears to be the rear lower seat cushions. I wanted a YW model so a '23 and '24 were out of the question, not to mention a low mile CPO example made it an easy choice, especially with the savings from new MSRP. From a utility standpoint, the few extra inches in vertical height would go a long way for my use case for this vehicle.
I've looked at all the old threads, including the 3rd row retrofits and just pulling the lower cushion from its clips.
Now that there is a factory solution, I wanted to investigate what parts would be needed to retrofit a '24 rear lower seat cushion. I would imagine, at minimum, some brackets and the cushions themselves and hopefully the wiring harnesses for heat/occupancy are the same. Does anyone have access to the '24 parts diagram or have a '24 they're willing to partially disassemble to get some part numbers for us?
I've looked at all the old threads, including the 3rd row retrofits and just pulling the lower cushion from its clips.
Now that there is a factory solution, I wanted to investigate what parts would be needed to retrofit a '24 rear lower seat cushion. I would imagine, at minimum, some brackets and the cushions themselves and hopefully the wiring harnesses for heat/occupancy are the same. Does anyone have access to the '24 parts diagram or have a '24 they're willing to partially disassemble to get some part numbers for us?
TReK
Joined: Oct 2007
Posts: 2,773
Likes: 1,982
From: Whidbey Island, PNW
Try this - it's not an e-commerce site but it's the JLR site in UK. It's not sorted by model year but by VIN, and you can sort of figure out the model year based on VIN range. (latest would be 2024 etc). I found it to be the best L663 parts diagrams online - https://parts.jaguarlandroverclassic.com/parts/index/hierarchy/id/33/brand/land-rover/\
Thread Starter
|
Three Wheeling
Joined: Jan 2024
Posts: 57
Likes: 26
From: CO
Try this - it's not an e-commerce site but it's the JLR site in UK. It's not sorted by model year but by VIN, and you can sort of figure out the model year based on VIN range. (latest would be 2024 etc). I found it to be the best L663 parts diagrams online - https://parts.jaguarlandroverclassic.com/parts/index/hierarchy/id/33/brand/land-rover/\
2nd Gear
Joined: Nov 2024
Posts: 2
Likes: 1
I am picking up a '22 D90 V8 next week. The only discernable difference from a '24 appears to be the rear lower seat cushions. I wanted a YW model so a '23 and '24 were out of the question, not to mention a low mile CPO example made it an easy choice, especially with the savings from new MSRP. From a utility standpoint, the few extra inches in vertical height would go a long way for my use case for this vehicle.
I've looked at all the old threads, including the 3rd row retrofits and just pulling the lower cushion from its clips.
Now that there is a factory solution, I wanted to investigate what parts would be needed to retrofit a '24 rear lower seat cushion. I would imagine, at minimum, some brackets and the cushions themselves and hopefully the wiring harnesses for heat/occupancy are the same. Does anyone have access to the '24 parts diagram or have a '24 they're willing to partially disassemble to get some part numbers for us?
I've looked at all the old threads, including the 3rd row retrofits and just pulling the lower cushion from its clips.
Now that there is a factory solution, I wanted to investigate what parts would be needed to retrofit a '24 rear lower seat cushion. I would imagine, at minimum, some brackets and the cushions themselves and hopefully the wiring harnesses for heat/occupancy are the same. Does anyone have access to the '24 parts diagram or have a '24 they're willing to partially disassemble to get some part numbers for us?
