my 98 disco1
#94
water leak thread https://landroverforums.com/forum/di...k-59088/page2/
pics of rust and holes under the fenders
pics of rust and holes under the fenders
Last edited by TOM R; 08-07-2013 at 02:33 PM.
#99
I did the same repair and installed a drain tube all the way down to the frame.
Last edited by JohnC.; 06-04-2013 at 10:35 AM.
#100
how did you install a drain tube?
ran out to my favorite u pull today and scored a pair of range rover factory headers with heat shields and the down tubes so once I get back to jersey we can get the y pipe made up and I can go back to driving the rover
do we need to use the heat shields that are on the headers?
funny thing is the dam range rover I got the headers from looked like a brand spankin new engine just had a small fire under the hood( melted wires by coil melted oil dip stick top) engine was insane clean no oil, grease nuthin I am half tempted to go pull the engine
ran out to my favorite u pull today and scored a pair of range rover factory headers with heat shields and the down tubes so once I get back to jersey we can get the y pipe made up and I can go back to driving the rover
do we need to use the heat shields that are on the headers?
funny thing is the dam range rover I got the headers from looked like a brand spankin new engine just had a small fire under the hood( melted wires by coil melted oil dip stick top) engine was insane clean no oil, grease nuthin I am half tempted to go pull the engine