The Trover is here, part truck all rover....
#21
Today I was able to get the Trover running on 8 cylinders! I fixed the wiring going to the coil pack then I was able to vacuum bleed the coolant system and checked temps. The Trover stayed at 176-180 the entire time but now i see the O2 sensors are running abit rich. I removed the front skid plate for the eventual oil change along with the front sway bar since this will be a trail toy. I was able to get the AC recharged along with cleaning out the blower fan before calling it a day.
I am hoping to tackle the ABS pump wiring that was chewed off tomorrow along with a good car wash and some sanding on the rusted bed.
I am hoping to tackle the ABS pump wiring that was chewed off tomorrow along with a good car wash and some sanding on the rusted bed.
#23
#24
#25
#26
Yesterday was a huge day! I was able to remove a good portion of the rust in order to get the process started on painting the bed, then i was able to get the rear tail light wiring done. here are
some pictures and videos.
Bed sanded down
Lights working
Led lights used
Here are some vids of the lights working
https://imgur.com/a/y4Qdf
some pictures and videos.
Bed sanded down
Lights working
Led lights used
Here are some vids of the lights working
https://imgur.com/a/y4Qdf
#27
#28
#30
The following users liked this post:
The Deputy (09-27-2018)