$10 window regulator fix
#21
anyone know if the sliders from a p38 would fit the channel on a disco? You can get the replacement p38 ones but i have no idea how big they are compared to the disco channel from looking at the pic. here's a link on AB's site.
Window Regulator Guide Clip (Genuine Part # ALR1051) - Land Rover door catches\window regulators from Atlantic British
Iff they are a little big they could be trimmed to fit the rail..
Window Regulator Guide Clip (Genuine Part # ALR1051) - Land Rover door catches\window regulators from Atlantic British
Iff they are a little big they could be trimmed to fit the rail..
will these work in a disco? thanks
#22
i would like to know it they fit too, i fixed a rear window with a slider for another car but no idea what car since my friend has a glass shop and we found one in his parts drawer, i have also seen a thread about using a kitchen cabinet drawer roller bearing from home depot
my drivers window now makes noise so that is also on my list to look at
my drivers window now makes noise so that is also on my list to look at
#24
#25
Discovery II Power Windows Rollers V5 (ZQNHTF3LW) by Georges_Payne
The following users liked this post:
philwarner (03-18-2016)
#26
I am ordering these, they come 3 to a pack, enough for 1 complete window or 3 different broken rollers.
Discovery II Power Windows Rollers V5 (ZQNHTF3LW) by Georges_Payne
Discovery II Power Windows Rollers V5 (ZQNHTF3LW) by Georges_Payne
I noticed that there are new regulator assemblies on eBay for $40 now (no motor)
Brian in Austin
#27
I am ordering these, they come 3 to a pack, enough for 1 complete window or 3 different broken rollers.
Discovery II Power Windows Rollers V5 (ZQNHTF3LW) by Georges_Payne
Discovery II Power Windows Rollers V5 (ZQNHTF3LW) by Georges_Payne
Please let us know how these work in a Disco 1. I repaired my driver's window with nylon flat washers recommended in another thread and it is working OK, but these 2-piece rollers look like the best solution if they fit our tracks. (just in case another window on my 98 bites the dust in the future).
#28
That's an interesting spin on replacement rollers. His page doesn't give much info on them. Seems like if it was legitimate, he would show the bits assembled on a regulator and talk about the assembly and gluing process and provide some info about durability.
I noticed that there are new regulator assemblies on eBay for $40 now (no motor)
Brian in Austin
I noticed that there are new regulator assemblies on eBay for $40 now (no motor)
Brian in Austin
see this post
https://landroverforums.com/forum/di...rollers-72533/
Thread
Thread Starter
Forum
Replies
Last Post
Al Blue4.6l
Discovery II
6
08-14-2011 05:28 PM
phillman98
General Range Rover Discussion - Archived
1
12-04-2010 10:01 PM