cataclean for P0430 & P0420?
The following users liked this post:
philwarner (03-16-2016)
#12
I did find a possible solution. Apparently some motorcycles use the 12mm o2 sensor. There is a company that makes a 12mm to 18mm adapter.
Then you use these 18mm to 12mm reducer to fit your o2 sensor in the adapter.
Amazon.com: Innovate Motorsports 3835 Motorcycle Exhaust Bung Adapter 12mm to 18mm O2 Wideband: Automotive
Then you use these 18mm to 12mm reducer to fit your o2 sensor in the adapter.
#13
Hello Good People,
Looks like another helpful thread that I have arrived to a bit late.
For those that are using this non-fouler/spacer are you still having good results with removing the P0430?
I replaced my entire exhaust system a couple years ago and just recently got the P0430 error.
New spark plugs. As for the plug wires they have less than 2000 miles on them.
I have heard of people using non-fouler/spacer for spark plugs, but no feedback on the success of using with 02 sensors.
Thanks
Looks like another helpful thread that I have arrived to a bit late.
For those that are using this non-fouler/spacer are you still having good results with removing the P0430?
I replaced my entire exhaust system a couple years ago and just recently got the P0430 error.
New spark plugs. As for the plug wires they have less than 2000 miles on them.
I have heard of people using non-fouler/spacer for spark plugs, but no feedback on the success of using with 02 sensors.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post