Flexible Propshaft Coupler Replacement
Thread Starter
|
Mudding
Joined: Aug 2015
Posts: 169
Likes: 14
From: Monroe, UT
Flexible Propshaft Coupler Replacement
While I was doing a recent oil change, I noticed my rear driveline flex coupler (TVF100010) was very deformed and probably ready to drop! I got one in from BPUtah I opted for their TVF100010B Britpart replacement w/ hardware and now I'm researching the procedure.
I see nothing special in the RAVE, but small snippets here and there on the forums mentioning the arrows, but have yet to find a complete procedural guide to this. I have also not found any mention of the center "bushing" as to which direction it is installed. Any input is welcome! Russ
I see nothing special in the RAVE, but small snippets here and there on the forums mentioning the arrows, but have yet to find a complete procedural guide to this. I have also not found any mention of the center "bushing" as to which direction it is installed. Any input is welcome! Russ
Pro Wrench
Joined: Nov 2015
Posts: 1,935
Likes: 189
From: Coastal Georgia
Your welcome and glad it'll help.
FYI for future reference, I found it good not to limit myself to just my D2's manual(s). Some other year/model manual may include component overhaul procedures, better parts diagrams, and/or other general information that can help get a better understanding.
......
FYI for future reference, I found it good not to limit myself to just my D2's manual(s). Some other year/model manual may include component overhaul procedures, better parts diagrams, and/or other general information that can help get a better understanding.
......
Thread
Thread Starter
Forum
Replies
Last Post