So my rear windows stopped working, as they always do in these things. I pulled the ECU, soldered the burnt joint and put the ECU back in. At this point, my rear windows went up and I was happy. like this > Then after a 5-10 minute drive, I parked the truck and went to put all of the windows up.... nadda. back to this > I checked the fuses and I had a blown 30 amp fuse, I replaced that and still a no go on all windows. Prior to this, my front windows worked no problem; it was just the rears. Now my front and rear windows are inoperable. Maybe the board is fried? Im not sure. I plan on jumping the rear windows as I've seen some people on here do, but im not sure which wires to jump for the front windows. Can anyone tell me or show me which ones to jump for the front? Thanks. Trying to take my date to a Phillies game in the LR Saturday, but cant unless I have a way to close the windows LOL. C-blockin Disco.

 

Sounds like your solder may have shorted it out, sorry to say. Think its new ECU time.

 

There should be a way to jump them though, similar to the rears. I just can't figure it out.

 

Sadly, I'm not an electric whiz...mercifully I havent had too much electrical stuff go wrong on me. maybe savannah can pitch in. but usually with something like that it's shorted....and is probably nigh on impossible to repair unless you know your electrics very, very well.

 

Yeah, I guess Im just looking for a temp fix until I can track down a good ECU that isnt $150. I gotta get over to the junk yard and see how much they want for the ECU thats there. Still, anyone know how to jump the front windows!?