rear ball joint
#1
rear ball joint
Is there a brand to stay away from?
I see AC delco, Moog, raybestus, beck arnley.
probly gonna stay away from Moog I have seen pics of their stuff new cut open their qc is gone to crap ie flat spot and unevenly ground ball, think they are made in Bulgaria now
Also heard delco is made by spicer so leaning toward that since last ones I did on my brothers truck were muck nicer then the Moog we took off that were 1 year old and bad
I see AC delco, Moog, raybestus, beck arnley.
probly gonna stay away from Moog I have seen pics of their stuff new cut open their qc is gone to crap ie flat spot and unevenly ground ball, think they are made in Bulgaria now
Also heard delco is made by spicer so leaning toward that since last ones I did on my brothers truck were muck nicer then the Moog we took off that were 1 year old and bad
Last edited by TOM R; 09-20-2013 at 11:03 AM.
#2
For a Brand, I've used Lemforder (RHF500110g) without any issues.
Try Trevor at Rovahfarm... RovahFarm for all your new Land Rover Parts and Accessories
Try Trevor at Rovahfarm... RovahFarm for all your new Land Rover Parts and Accessories
#6
Had to reorder the joint got the beck arnly it has a strange clear grease boot yes clear, sealed bag said made in great Britain, so all back together, I cannot see doing this job without a press, I reinstalled the rear A arm 1 piece at a time then bolted in the center with joint super easy this way cannot imagine fighting that whole assembly in in one piece heavy as it is, pic to follow
Last edited by TOM R; 10-01-2013 at 06:57 PM.