Your best MacGyver, show and tell.
#11
Well I dont have anything earth shattering believe it or not but I have a couple stories and words of advice.
A hilift handle or collapable shovel handle will work to straighten a bent stock steering rod.
20w oil will get you home as power steering fluid but it's not suggested. Especially not when wheelin in 5" of snow in Jan.
Ratchet straps, duct tape, a BFH, hose clamps and bottle jacks and hi lift kits are the true MUST NEEDS when wheeling. And of course tools.
Only one show and tell. Jeep blew u-joint and both ball joints while exiting creek bed during the same trip in Jan. Wheel literally came off the truck. We jacked it up, lined it all up, used the weight of the vehicle to get it back to some what aligned. Then we used a rachet strap to hold it all into place. Then a wrangler on 40's had to pull him down the trail and up the steep, rocky 100 yard exit. Here's some pics..
The crazy part is once we got back to the road he drove it home, very slowly.
A hilift handle or collapable shovel handle will work to straighten a bent stock steering rod.
20w oil will get you home as power steering fluid but it's not suggested. Especially not when wheelin in 5" of snow in Jan.
Ratchet straps, duct tape, a BFH, hose clamps and bottle jacks and hi lift kits are the true MUST NEEDS when wheeling. And of course tools.
Only one show and tell. Jeep blew u-joint and both ball joints while exiting creek bed during the same trip in Jan. Wheel literally came off the truck. We jacked it up, lined it all up, used the weight of the vehicle to get it back to some what aligned. Then we used a rachet strap to hold it all into place. Then a wrangler on 40's had to pull him down the trail and up the steep, rocky 100 yard exit. Here's some pics..
The crazy part is once we got back to the road he drove it home, very slowly.
#12
Bringing this back from the dead.....
The bottom hinge on the rear cargo door broke. Actually the pin sheared leaving 3 pieces stuck inside the parts of the hinge. I had saved an almost brand new hinge from my parts truck!
Then I realized they go for $65-100 new and I got all cheap. Didn't really want to put a new hinge on a daily driver I'd probably be getting rid of.
So I pulled the hinge out and pressed the sheared off pieces of pin out. Then I reamed the pin holes on the hinge to 3/8".
$3 later for a 3/8" Grade 8 bolt and nylock and I have a like new hinge.
Lets see some new MacGyver fixes!
The bottom hinge on the rear cargo door broke. Actually the pin sheared leaving 3 pieces stuck inside the parts of the hinge. I had saved an almost brand new hinge from my parts truck!
Then I realized they go for $65-100 new and I got all cheap. Didn't really want to put a new hinge on a daily driver I'd probably be getting rid of.
So I pulled the hinge out and pressed the sheared off pieces of pin out. Then I reamed the pin holes on the hinge to 3/8".
$3 later for a 3/8" Grade 8 bolt and nylock and I have a like new hinge.
Lets see some new MacGyver fixes!
Last edited by fishEH; 05-30-2013 at 11:57 AM.
#14
#15
So basically I'm making a list of stuff to keep in the truck...... ; )
I do keep some of that rescue tape in all my cars...that silicon type stuff that sticks to itself to repair a split hose. Never had to use it though my dad did. From my years of racing I know that that more I carry the less likely I am to break down, and then I can help others.
Cheers.
I do keep some of that rescue tape in all my cars...that silicon type stuff that sticks to itself to repair a split hose. Never had to use it though my dad did. From my years of racing I know that that more I carry the less likely I am to break down, and then I can help others.
Cheers.
Thread
Thread Starter
Forum
Replies
Last Post