Hi there,

I currently have the 3 amigos lit up, the nearest dealership with a diagnostic tool that can read my 2000 Disco 2 TD5 is over 2000km away. I have tried a G-scanner that I have borrowed from work, but it doesn't seem to be able to read the disco. I have heard that you can buy a cheap tool off the internet that can read the disco codes, anyone know about or used this?? In the meantime I am going to clean all of the ABS sensors to see if this will help.

The next issue is that with the engine idling while I was outside the car I could hear a rattle noise, upon inspection I found the culprit to be on the rear of the transfer case as highlighted with the screwdriver in the pic attached, seems to be about 10mm play up and down with this part and there is quite a bit of oil leaking around this area. I don't know what the part is that I am pointing too any ideas as to what is the problem would be a great help.

Cheers

Tommy

 

Rent the reader from these guys:

ABS Amigo V1 USB - Discovery II - RENTAL - Rentals - Tools

 

i'm not sure if they will rent to Australia!

 

Go to Australian Land Rover Owners

They have a sticky thread on that forum of people that have tools like nanocom that will help you read your codes, usually for free.

 

Members with diagnostic equipment - Australian Land Rover Owners

 

Cheers Jafir, I've located a diagnostic tool in town!

 

Turned out to be SHUTTLE VALVE ELECTRICAL FAILURE i hope following the steps on this link will solve my problem ABS Mod - LAND ROVER CLUB V.I.

 

Hope you manage to get the issue resolved as soon as possible!

 

code 4114