3rd row jump seats

Reply Subscribe

Thread Tools

Search this Thread

Feb 21, 2019 | 05:58 PM

Daveandsilver

Thread Starter

2nd Gear

Joined: Feb 2019

Posts: 2

Likes: 0

3rd row jump seats

Looking down from the top while it is folded up. I know it is not bolted I took it out trying to find the issue
Need advice maybe parts. Just bought a 2001 Disco II w/ two seats that fold out for the third row. My question is the drivers side is 6 inches too short of latching to the floor. And I missing any parts?

Feb 21, 2019 | 11:20 PM

FlyingZebra34

Recovery Vehicle

Joined: Feb 2012

Posts: 1,039

Likes: 43

From: Aberdeen, Washington

That's odd. Mine flip out a bit more than that. If you bolt it in the flippy piece should extend more.

Feb 22, 2019 | 01:46 AM

shanechevelle

Pro Wrench

Joined: Oct 2011

Posts: 1,709

Likes: 137

From: NE PA

There are two different seats for the driver side. One with rear air and one without.

you may have a seat from a rear air car which would be shorter.

Feb 22, 2019 | 03:28 AM

Daveandsilver

Thread Starter

2nd Gear

Joined: Feb 2019

Posts: 2

Likes: 0

shanechevelle

Thank you so much! I have been searching the Internet for two weeks trying to find this answer!!

Feb 22, 2019 | 08:27 AM

XRAD

Pro Wrench

Joined: Feb 2019

Posts: 1,288

Likes: 444

Quote:

Originally Posted by shanechevelle

There are two different seats for the driver side. One with rear air and one without.

you may have a seat from a rear air car which would be shorter.

Very cool fact!

Feb 23, 2019 | 12:10 AM

Daytoman

Rock Crawling

Joined: Dec 2010

Posts: 463

Likes: 119

From: Heartland ‘Murica

Quote:

Originally Posted by XRAD

Very cool fact!

That is a good nugget for sure. Makes sense.

Feb 23, 2019 | 05:25 AM

shanechevelle

Pro Wrench

Joined: Oct 2011

Posts: 1,709

Likes: 137

From: NE PA

Only on the drivers side.

also, few years ago I posted that you cant put seats in a rover that wasnt ordered with them. I found that to be sort of untrue.
I've seen two rovers with no indents for the jump seat mount at the floor, meaning there would have to be grafted in, but, many have the floor mounts there. You have to disassemble the flooring mats/carpet to see if yours is there.