Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

Akebono brake pads

Thread Tools
 
Search this Thread
 
  #21  
Old 04-10-2013 | 10:19 AM
drowssap's Avatar
Baja
Joined: Feb 2011
Posts: 9,298
Likes: 317
From: Boston Strong
Default

if its copper I'm guessing that it is anti-seize, different product.
 
  #22  
Old 04-10-2013 | 12:57 PM
Disco Mike's Avatar
Administrator
Joined: Apr 2006
Posts: 25,707
Likes: 106
From: Denver, Colorado
Default

Akebono pads are supplied with a paste type of sound deadening material, use it not copper spray or anti seize for much better results.
Before tearing the brakes down, put the pad on a piece od news paper, in the sun if possible, with the metal backing plate up, smear on some of the paste and let it sit prior to installing.
 
  #23  
Old 04-10-2013 | 03:31 PM
AdrenalinPlease's Avatar
Thread Starter
|
Winching
Joined: Jul 2012
Posts: 547
Likes: 4
From: Jackson NJ
Default

Im confuseded...use the stuff they provide or dont use the stuff they provide?
 
  #24  
Old 04-10-2013 | 04:25 PM
AdrenalinPlease's Avatar
Thread Starter
|
Winching
Joined: Jul 2012
Posts: 547
Likes: 4
From: Jackson NJ
Default

How about ebc oe rotors?
 
  #25  
Old 04-16-2013 | 01:01 PM
AdrenalinPlease's Avatar
Thread Starter
|
Winching
Joined: Jul 2012
Posts: 547
Likes: 4
From: Jackson NJ
Default

Well the pads have been installed but the rotors are not here yet, so I cut the rotors for now. Brakes feel good but the initial bite is meh, although when they are warm they are nice, no fade either. Will update once new rotors are in.
 
  #26  
Old 04-16-2013 | 01:47 PM
Discoverer5's Avatar
Drifting
Joined: Oct 2012
Posts: 46
Likes: 0
From: Va
Default

Why would anyone put cross drilled or slotted rotors on a vehicle like this unless its for aesthetic purposes. It does nothing for performance....at all. Heat distribution/exchange is better for things with more mass. In turn, by drilled the rotors you create weak points in the rotor and reduce mass. Modern day pads do not need to "outgas" so there is no need for the cheese grater on the rotors. It's physics people... Read this Rotors: Blank vs Cross Drilled vs Slotted and Warping | Automotive Thinker - Discussing the finer points of automobiles
 
  #27  
Old 04-16-2013 | 04:50 PM
AdrenalinPlease's Avatar
Thread Starter
|
Winching
Joined: Jul 2012
Posts: 547
Likes: 4
From: Jackson NJ
Default

I got blanks but my race bike is cross drilled and floating.
 
  #28  
Old 04-16-2013 | 04:51 PM
AdrenalinPlease's Avatar
Thread Starter
|
Winching
Joined: Jul 2012
Posts: 547
Likes: 4
From: Jackson NJ
Default

Motogp bikes use solid rotors
 
  #29  
Old 04-28-2013 | 07:24 PM
AdrenalinPlease's Avatar
Thread Starter
|
Winching
Joined: Jul 2012
Posts: 547
Likes: 4
From: Jackson NJ
Default

Ok we'll it's been a few miles since I installed the akebono pads and r1 concepts blank rotors. They feel good, braking power is not comparable to stock but that may be due to the fact that I haven't flushed the brake fluid yet, will Do this week.
 
  #30  
Old 04-28-2013 | 10:18 PM
bosshogt's Avatar
Recovery Vehicle
Joined: Feb 2009
Posts: 1,151
Likes: 30
From: Denver, CO
Default

If you take a look on Tirerack.com. It states Akebono pads take 300 -400 miles to bed in. So the may not feel really good for a month or more depending on how much you drive your rover.
 


Quick Reply: Akebono brake pads



All times are GMT -5. The time now is 01:05 PM.