Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

ARB/TJM/etc Front Bumper for Daily Driving

Old Jan 2, 2013 | 06:11 PM
  #31  
ZGPhoto's Avatar
Camel Trophy
Joined: Apr 2012
Posts: 4,533
Likes: 103
From: Burlington, VT
Default

I did this to put an 03-04 bumper not, not the ARB. I put the 99-02 ARB on my truck.

As for big bumpers, they offer protection. The DII doesn't have much of a front overhang at all until you start adding bumpers. The rear overhang is 1000x worse. The Tactical rovers bumper and TeRRAFIRMa bumper have great approach angles.
 
Reply
Old Jan 2, 2013 | 08:42 PM
  #32  
TrailRunner's Avatar
Thread Starter
|
Overlanding
Joined: Dec 2012
Posts: 18
Likes: 0
From: Maryland
Default

Thanks. I'm thinking the 99-02 bumper is the way to go, especially since I have a 2002.

Stupid question to follow on - are Hella fogs (My Hella Lights :: Rallye 4000 Fog) better than the factory fogs on the 2002? Reason I ask is that the Hella lights would be grille height and toward the middle, while the factory ones are low and on the outside.
 
Reply
Old Jan 2, 2013 | 08:50 PM
  #33  
Spike555's Avatar
Team Owner
Joined: Jun 2007
Posts: 26,212
Likes: 98
From: Grand Rapids MI
Default

You can adjust the ARB to make it sit higher or lower on the truck so no trimming of the truck should be needed.
 
Reply
Old Jan 2, 2013 | 08:54 PM
  #34  
ZGPhoto's Avatar
Camel Trophy
Joined: Apr 2012
Posts: 4,533
Likes: 103
From: Burlington, VT
Default

the rallye 4000 fogs are a thousand times brighter than the factory lights, its...night and day....

By the way, you should put your location in your profile.
 
Reply
Old Jan 2, 2013 | 10:08 PM
  #35  
ScreamingLife's Avatar
Rock Crawling
Joined: Jan 2011
Posts: 446
Likes: 3
From: Honolulu, Hawaii
Default

Originally Posted by ZGPhoto
the rallye 4000 fogs are a thousand times brighter than the factory lights, its...night and day....
Thats the truth! I went out wheeling today and we got into a patch of fog coming back out from the point we were at, and there was very little margin to the drivers side (think 3 feet then you are in the ocean), I was leading the group and I turned my 4000's on and they cut through the fog like a hot knife through butter. It was awesome.
 
Reply
Old Jan 2, 2013 | 10:43 PM
  #36  
aarongregor's Avatar
Winching
Joined: Feb 2011
Posts: 688
Likes: 5
From: Mississippi
Default

ZG, Street Wolf and Spike are spot on!
 
Reply
Old Jan 2, 2013 | 10:47 PM
  #37  
TrailRunner's Avatar
Thread Starter
|
Overlanding
Joined: Dec 2012
Posts: 18
Likes: 0
From: Maryland
Default

Very cool. When you say Rallye 4000 fog, we are all referring to the actual "fog" version of the lights, not the standard ones right? Thanks everyone!
 
Reply
Old Jan 2, 2013 | 10:52 PM
  #38  
binvanna's Avatar
Winching
Joined: Oct 2012
Posts: 676
Likes: 43
Default

Originally Posted by ZGPhoto
I did this to put an 03-04 bumper not, not the ARB. I put the 99-02 ARB on my truck.

As for big bumpers, they offer protection. The DII doesn't have much of a front overhang at all until you start adding bumpers. The rear overhang is 1000x worse. The Tactical rovers bumper and TeRRAFIRMa bumper have great approach angles.
I mean like the D90. It seems way better than a Disco. A JK with oversize tires will basically do 90 degrees, so the Disco at like 40 degrees is starkly limited.
 
Reply
Old Jan 2, 2013 | 11:47 PM
  #39  
Rover_Hokie's Avatar
Recovery Vehicle
Joined: Sep 2009
Posts: 1,135
Likes: 14
From: Roanoke Valley, VA
Default

Trailrunner,

I was brand new to rovers when a deer gave me this same opportunity, and I was green and went for the stock replacement. Now, all I do is look at bumpers. I, like you, want the fogs of the 03/04 ARB, but no recovery points was not good. I think this is what I am going to go with now. Four years after my new stock bumper provided by the insurance company, and more knowledge of my rover and off-roading. You may want to consider this bumper by HLC Fab.





Or HLC Fab can put whatever type bull bar or no bull bar. They have done this same style bumper with multiple types of A-bar, full traditional bull bar, and most any other way you may want it up top. They can also make some changes to the design of the face of the bumper within some limits, as each bumper is custom made. You get the nice fogs that they provide to connect to your stock fog light wiring, great shackle mount points that are very sturdy, and with or without the winch opening.
 

Last edited by Rover_Hokie; Jan 2, 2013 at 11:54 PM.
Reply
Old Jan 2, 2013 | 11:56 PM
  #40  
BrandonS's Avatar
Mudding
Joined: May 2012
Posts: 193
Likes: 15
From: Oklahoma
Default

That is a very nice looking bumper! I however do not see that particular one on their site.
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:48 AM.