can't get grease out of the front driveshaft
#1
#2
How long ago did you rebuild? Is the grease just squeezing out around the zerk? If you can't move grease through the u-joint, it is toast. As grease gets older, it gets cooked by the heat from the cat. Keeping the grease fresh keeps it working. Once it's solid from the heat it loses it lubricity.
#4
After redoing mine, I could only get grease out of 2. I ziptied a scrap of paper towel around the joint with the most discharge, and was then able to get machine grease out of the other two.
I then drove it around for a couple hundred miles. After that, the grease came pretty easily out of all 4.
I then drove it around for a couple hundred miles. After that, the grease came pretty easily out of all 4.
#6
#9