anybody got any quick reference on how to remove the center dash console for replacement?

 

Let me clarify where the radio and a/c control unit is

 

Radio = use folder clips to release the locking mechanism
HVAC = Remove lower cubby part, then carefully release the clock via two bottom tabs CC works well to release them, then the same for the switch pack. After that push the metal tabs to release the HVAC Control Head.

 

Other than the HVAC Controls it's very similar to the DI. Some good pics here > Discovery 1 spider/centre dash removal

 

See minute 2:01 in this video:


https://www.aulro.com/afvb/discovery...ml#post1901528

 

Finished!!!

 

Good to see your toe is tapping and the music is playing!

 

Yea love the new radio just gotta swap all the speakers out now to Memphis car audio so it sounds clearer and a bit better

 

Hey Lucky do you have the HK system in yours? Reason I'm asking is I replaced my HU and the engine noise is horrible. After checking all the grounds I traced it back to the factory amp as the source, so it looks like ill need to replace the amp. From what Ive researched its no easy task to put in a aftermarket amp because it requires rewiring the system. Do you have any experience with this?

 

I removed my whole console today, cake

oh...you don't have a legit CDL until you get that sticker updated