....these guys around here really know their stuff...My plug wires will be here tomorow!! thanks to everyone --hopefully that will fix the issues!

 

You do not need to take off the intake manifold:

https://landroverforums.com/forum/sh...highlight=wire

It would be easier though if you have access to child labor though, small hands are good with a disco.

 

...Plug wires are here and gonna try and change them. I printed out the instructions above so wish me luck!!

 

Before you jump into the wires you might want to talk with me for a few tips and short cuts, by the way, I don't have your number.

 

I have a wiring diagram too that may help PM me if you need it.

 

Sorry DiscoMike didn't see you post before i jumped into it. OK guys here is the story. I consider myself halfway mechanical--I have a 6.90 210mph Twin Turbo Outlaw 10.5 drag car, SO i printed out the instruction you guys gave on here and it worked PERFECT---everything was as expected and I completed the job in about an 1:45 minutes. The truck runs GREAT NOW...then BOOM running around service engine soon light came on again!! ARRGGGG BUT it is still running smooth..so i will have the code read today on whatever it is and let you VERY smart guys know. I want to say THANKS so far for the help--this site is invaluable to someone like me who can tackle a job like this with your guidance. I will get the NEW codes and let you know what it says......BUT are you kidding me??? A coil placed there????? WHY???? LOLOLOL GOD BLESS ALL DISCO OWNERS!! One must love them to go through this!

 

Read your codes you probably need new O2 sensors.

 

BINGO BINGO---pass. side downstream O2!!! One thing at a time--Oh next thing after looking at the 60k tune-up--is trans fluid..Not that I have looked closely but where is the fill tube??

 

Just replace O2 sensors as pairs.

You have to drain and fill transmission fluid underneath. You will have to buy a small gear oil pump. I believe Spike555 just did an overview of the fluid change.

 

UNREAL!!! after plugs truck is running great...then service engine soon light came back on--had to work so figured i would send wife by to auto zone to read codes. they told her o2 sensor bank 2 sensor 1--and told her it was o2 after cat. therefore, she went ahead and got one---then i replaced it. guess what--service engine soon light came back on and i was so mad that i was sure they gave her wrong one she went down there again and got these codes.......p0174, p1174 and p0150

Im gonna replace all of them now i guess but so frustrated with those people. anyway, can't say it enough but thanks to all you on here!!

ANY OTHER SUGGESTIONS???