The hard line going from the rad to the coolant expansion tank snapped at the bend coming out of the rad. The nipple on the rad was fine so I ran some silicone hose from rad to tank, prob solved right? Now the rover will start but keeps stalling until running for a while and nice and warm. I am at a lose? I know coolant sprayed and I had air box open at the time but I cant see some coolant in the intake pooching anything. please help guys, only vehicle. ty

 

unplug the MAF and see what it does. I could see that coolant on the MAF would make it unhappy.

 

x2 MAF