This may belong in audio/visual but this is D2 specific so I figured I’d post it here. The 1st and 2nd pic is the mostly finished product and the following pics are from the build process.

 

So first I started on the subs. This build is all about sq and a little about spl. So I chose Stereo Integrity for the 2 12’s.



Stereo Integrity SQL 12.

The mounting location

What i used to seal the air vent

A layer of fiberglass and stone start of the box


About 5 final layers here

How I got around the seatbelt

Back side near door added

Glass and resin the inside for water resistance and strength

 

More build pics



Figuring out total airspace

Checking size for airspace math

Front

Back

Front

In truck without face

I only had one sub at first. So I used the gasket for a template

Here you can see the face didn’t sit flush with the fiberglass because I miss measured BUT fiberglass is forgiving and allows me to patch it

Double baffled the front face (2 3/4in mdf on glued)

In the truck with seat down

With seat up

 

More build pics

I wanted to keep all the tie downs so I made sure to build the box “around” it

 

I quickly determined I needed 2 subs and so…



the amp rack pics will be posted shortly

 

And the amp rack

 

Nice work on the enclosures! Do you have a bumper mounted tire rack? Can you post pics if you do...thx

 

I do. And yes I’ll post it

 

agreed! nice work. you'll turn heads as you cruise around blasting showtunes and Disney musical numbers.

seriously, though. that is some nice work on the enclosures.

 

Great work, and I don't even have any interest in car audio! I noticed that you have a load space rack suspended from above, I fabbed one of those up too (my first ever welding project), it really helps storage in the back now that you can take advantage of the D2 height.