Failing BCU?
#1
Failing BCU?
Started to notice strange electrical issues. Condenser fan running all the time and fuel gauge momentarily dropping to E with amber light and bouncing right up to F.
I just noticed the condenser fan this weekend. I had the hood off for painting and drove around a little. Fan was on as soon as I started her and ran for a few seconds after shutting her off. Coolant temp was in the low 180s, ambient temp in the low 80s, AC off.
Fuel gauge only seems to do it right after right hand sweeper turns.
Both seem random.
Random cyl 8 miss fire code. Reset.
Also, had a lot of water coming into the pass footwell a couple of months ago. All good now.
Thoughts?
I just noticed the condenser fan this weekend. I had the hood off for painting and drove around a little. Fan was on as soon as I started her and ran for a few seconds after shutting her off. Coolant temp was in the low 180s, ambient temp in the low 80s, AC off.
Fuel gauge only seems to do it right after right hand sweeper turns.
Both seem random.
Random cyl 8 miss fire code. Reset.
Also, had a lot of water coming into the pass footwell a couple of months ago. All good now.
Thoughts?
Last edited by Tony Luna; 10-12-2020 at 08:31 PM. Reason: Wrong title
Thread
Thread Starter
Forum
Replies
Last Post
Micmac
Discovery II
2
08-22-2020 02:54 PM