Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

High idle upon startup

Old Jul 17, 2007 | 03:40 PM
  #1  
rravenn13's Avatar
Thread Starter
|
Drifting
Joined: Jun 2007
Posts: 48
Likes: 0
Default High idle upon startup

1996 disco Lately when I start my truck the idle goes up to about 2k and stays there until I drive it. For the first 5 min of driving it chokes and hesitates at stops. Then for the rest day its fine. I alredy tried cleaning the idle control valve. Any other ideas?

 
Reply
Old Jul 17, 2007 | 03:42 PM
  #2  
98roverguy's Avatar
Recovery Vehicle
Joined: Aug 2006
Posts: 1,002
Likes: 2
From: Colorado Springs, CO
Default RE: High idle upon startup

How many miles on her?
 
Reply
Old Jul 17, 2007 | 03:55 PM
  #3  
rravenn13's Avatar
Thread Starter
|
Drifting
Joined: Jun 2007
Posts: 48
Likes: 0
Default RE: High idle upon startup

8100k
 
Reply
Old Jul 17, 2007 | 03:56 PM
  #4  
rravenn13's Avatar
Thread Starter
|
Drifting
Joined: Jun 2007
Posts: 48
Likes: 0
Default RE: High idle upon startup

81000k 8100k I WISH!
 
Reply
Old Jul 17, 2007 | 04:28 PM
  #5  
98roverguy's Avatar
Recovery Vehicle
Joined: Aug 2006
Posts: 1,002
Likes: 2
From: Colorado Springs, CO
Default RE: High idle upon startup

Have the check engine light or any lights come on?
 
Reply
Old Jul 17, 2007 | 04:30 PM
  #6  
rravenn13's Avatar
Thread Starter
|
Drifting
Joined: Jun 2007
Posts: 48
Likes: 0
Default RE: High idle upon startup

no in fact it has recently been serviced and has been running great. The hotter the weather the worse it seems to be though.
 
Reply
Old Jul 17, 2007 | 04:34 PM
  #7  
Disco Mike's Avatar
Administrator
Joined: Apr 2006
Posts: 25,707
Likes: 107
From: Denver, Colorado
Default RE: High idle upon startup

Your throtle body and stepper motor need to be cleaned, that will brin your idle back in line unless your stepper is too far gone then you may need to replace it.
Mike
 
Reply
Old Jul 17, 2007 | 04:37 PM
  #8  
98roverguy's Avatar
Recovery Vehicle
Joined: Aug 2006
Posts: 1,002
Likes: 2
From: Colorado Springs, CO
Default RE: High idle upon startup

You were on the right track in my mind to have targeted the idle control valve. I guess I would start by checking all my vaccum lines for cracks or exposure. I suppose it is of course possible that it still could be the ICV, but I'm a bit lost on this one. I'm sure Mike will have some good input.
 
Reply
Old Jul 17, 2007 | 04:38 PM
  #9  
rravenn13's Avatar
Thread Starter
|
Drifting
Joined: Jun 2007
Posts: 48
Likes: 0
Default RE: High idle upon startup

Where is the stepper moter found?
 
Reply
Old Jul 17, 2007 | 08:01 PM
  #10  
LRDISCO's Avatar
Mudding
Joined: Jul 2007
Posts: 121
Likes: 0
From:
Default RE: High idle upon startup

I am having the exact same problem with a 02' disco with 43k miles. Ill start it up When its been sitting for awhileand it will stay at about 1500 rpm for about 1-2 min.
 
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:36 AM.