Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

Hold up waitaminute I thought.....

Thread Tools
 
Search this Thread
 
  #11  
Old 12-03-2007, 06:02 PM
Darover's Avatar
Recovery Vehicle
Thread Starter
Join Date: Feb 2007
Location: Ottawa, Ontario, Canada
Posts: 1,088
Likes: 0
Received 1 Like on 1 Post
Default RE: Hold up waitaminute I thought.....

I understand that it can have an effect on mileage, but by how much ???? they were off by 8 psi.

You can't swap the sensors on a D2, cause the wiring harness for the rear ones are too short to plug in the front.
 
  #12  
Old 12-03-2007, 07:32 PM
okdiscoguy's Avatar
Camel Trophy
Join Date: Feb 2007
Location: Tulsa, OK
Posts: 4,959
Likes: 0
Received 10 Likes on 10 Posts
Default RE: Hold up waitaminute I thought.....

dang. Just a thought.

It does make sense that you wouldn't get a good bump because your sensors weren't up there on mileage yet..

Don't know what to tell you.
 
  #13  
Old 12-08-2007, 12:15 PM
Darover's Avatar
Recovery Vehicle
Thread Starter
Join Date: Feb 2007
Location: Ottawa, Ontario, Canada
Posts: 1,088
Likes: 0
Received 1 Like on 1 Post
Default RE: Hold up waitaminute I thought.....

For everybody's info, the dealer new what to do. They had to what they called 'reset the adaptations' on the ECU. Took some 15 minutes overall and I wasn't charged for this.

They explained that although I erased the codes with my OBD2 reader, they still had to do a system reset in order for the ECU to get off the 'damaged O2 sensor' mode which causes the vehicle to run full rich and get on the 'fixed problem normal operation' mode to allow the fuel ratio to go back to normal.

Thanks for all of you who gave a shot to my problem. Hopefully, this diagnostic will help others in the futur.

Darover
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
leve8888
General Tech Help
7
04-12-2010 04:16 PM
meltdowndave
Discovery II
6
12-17-2009 09:42 PM
discodefender
Discovery II
4
01-31-2009 12:04 PM
CandiMan
Discovery II
2
03-18-2008 10:18 PM
Disco2Guy
Discovery II
6
01-31-2008 04:27 PM



Quick Reply: Hold up waitaminute I thought.....



All times are GMT -5. The time now is 07:25 PM.