Homemade accessory...
#1
Homemade accessory...
Hi Guys,
I thought I would share with you a project my brother and I have been working on. We mapped a LR logo and used a CNC machine to make a custom front license plate out of aluminum. Here are some photos of the plate fresh out of the mill and after paint. I have been perfecting the process and hopefully will have it streamlined soon to start making other custom plates. I think it turned out pretty well!
I thought I would share with you a project my brother and I have been working on. We mapped a LR logo and used a CNC machine to make a custom front license plate out of aluminum. Here are some photos of the plate fresh out of the mill and after paint. I have been perfecting the process and hopefully will have it streamlined soon to start making other custom plates. I think it turned out pretty well!
#5
The paint was the most expensive input ($8), the aluminum cost all of two dollars (at most). My brother works for a company that has the mill, I think it costs them about $60k. The element that took the most time was mapping the logo to program the machine.
All things considered, I either have the most expensive -- or cheapest -- license plate by far...
All things considered, I either have the most expensive -- or cheapest -- license plate by far...
#9