Installing dual 12 VDC port in place of driver's side coin tray. Need 12V source
#1
Installing dual 12 VDC port in place of driver's side coin tray. Need 12V source
Can anyone recommend an easily accessed point for 12VDC for my dual power ports that I am replacing my driver's side coin tray/ash tray slide with. Want it hot at all times so I can charge a phone when camping without having to put the key in the ignition.
Brian in Austin (Cedar Park)
Brian in Austin (Cedar Park)
#3
I've done this twice, once for always-on power for an old Garmin GPS and once, like you, to be able to charge my phone when camping without leaving the key in the ignition. I used an Add-A-Circuit and they've both been great. I recall I plugged one into F17 in the passenger compartment fuse box (Audio system power amp) but I don't recall where I put the second one.
#4
I've done this twice, once for always-on power for an old Garmin GPS and once, like you, to be able to charge my phone when camping without leaving the key in the ignition. I used an Add-A-Circuit and they've both been great. I recall I plugged one into F17 in the passenger compartment fuse box (Audio system power amp) but I don't recall where I put the second one.
bc
Thread
Thread Starter
Forum
Replies
Last Post
sickws6
Discovery II
49
01-28-2024 05:35 PM
jpluncford21
General Tech Help
0
08-03-2010 06:51 AM