Just installed Ultra-Gauge - Best present ever
#11
#15
#16
Eeeck! So, after doing the heads, adding a bleeder in the rad. hose "TEE", getting all the air out of the cooling system, it seems to be running right, except the temp gauge seems to wanna sit at the top of the operation window...I put a thermometer in the free stream on the over flow and it reads 195, I put it down the throat of the rigid pipe on the intake, it read 195...but, I'm still chicken to drive it...
So, I just got an ULTRA GAUGE, only problem, I go to plug it in and NO FLIPPIN' PORT!!! The hole in the panel is EMPTY!!! What idiot did that?! I'm hopin' I find the dang thing when I pull the panel off...of all the mucked up things I've run into on this rig, not finding the OBD port NEVER even occurred to me...
I just thought I'd snivel a little as long as I was looking around to see if there was ANY chance that the OBD port was NOT supposed to be in that nice, little, rectangular opening on the panel over the accelerator pedal...but looking at the pix above, leaves me little hope the port is located elsewhere...
So, I just got an ULTRA GAUGE, only problem, I go to plug it in and NO FLIPPIN' PORT!!! The hole in the panel is EMPTY!!! What idiot did that?! I'm hopin' I find the dang thing when I pull the panel off...of all the mucked up things I've run into on this rig, not finding the OBD port NEVER even occurred to me...
I just thought I'd snivel a little as long as I was looking around to see if there was ANY chance that the OBD port was NOT supposed to be in that nice, little, rectangular opening on the panel over the accelerator pedal...but looking at the pix above, leaves me little hope the port is located elsewhere...
#17
Oh, on the rebate topic for the Ultra Gauge, on another forum, a guy was bemoaning that it was definitely more trouble than it was worth...being only $9...as for availability and delivery time, they get a "A" in my book! From the day I ordered to the day I received it, including a weekend, was only a week...it was like Tuesday to Tuesday...