Discovery II Talk about the Land Rover Discovery II within.
Sponsored by:
Sponsored by:

Landrover D2 wont start.. .

Thread Tools
 
Search this Thread
 
  #1  
Old 10-29-2019, 09:10 PM
Chrisb_official's Avatar
4wd Low
Thread Starter
Join Date: Oct 2019
Posts: 10
Likes: 0
Received 1 Like on 1 Post
Default Landrover D2 wont start.. .

Hi Guys, im Chris & new here.
Long story short. My LD2 was parked outside over night by morning i notice that that the radio was missing (stolen)
I dont undertans how the thieves bypass the alarm or even open it.? After this my Rover just clicks now when im trying to start it... And sometimes clicks then i try again and it the D2 tries to ignite but no luck. It goes back to the clicking sound...
The battery is fully new from today... Could anyone help me or advise me ? Would greatly appreciate it!
 
  #2  
Old 10-29-2019, 10:52 PM
Esco4227's Avatar
6th Gear
Join Date: Nov 2018
Posts: 6
Received 1 Like on 1 Post
Default

Something happen to a buddy of mine where they locked the keys inside and the had a lock smith open the car and it went to a "protect mode" and the only way there able to start the vehicle he bought a scanner called Hawk and reset the fault codes that were showing. Have you tried to use a scanner to read any codes?
 
The following users liked this post:
Cook90 (11-01-2019)
  #3  
Old 10-29-2019, 10:57 PM
Chrisb_official's Avatar
4wd Low
Thread Starter
Join Date: Oct 2019
Posts: 10
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Esco4227
Something happen to a buddy of mine where they locked the keys inside and the had a lock smith open the car and it went to a "protect mode" and the only way there able to start the vehicle he bought a scanner called Hawk and reset the fault codes that were showing. Have you tried to use a scanner to read any codes?
Thanks for the reply, actually no i have not tried a scanner, been focused on the issue that i actually forgot that option,will do tomorrow, & report.
 
The following users liked this post:
Esco4227 (10-29-2019)
  #4  
Old 10-30-2019, 07:41 AM
Broken08's Avatar
Rock Crawling
Join Date: Jan 2015
Location: Denver foothills
Posts: 356
Received 18 Likes on 13 Posts
Default

Make sure those battery terminals are very clean and tight too. And the ground connections.
 
  #5  
Old 10-30-2019, 06:59 PM
Chrisb_official's Avatar
4wd Low
Thread Starter
Join Date: Oct 2019
Posts: 10
Likes: 0
Received 1 Like on 1 Post
Default

I tried the terminals & still wont start, it weird everything work the locks, the remote, but i notice that when it makes the click sound the oil & battery light saty on...
 
  #6  
Old 10-30-2019, 07:44 PM
Extinct's Avatar
Camel Trophy
Join Date: Feb 2013
Location: Lynchburg VA
Posts: 4,565
Received 1,508 Likes on 1,068 Posts
Default

Lock and unlock the door three times with the key, see if it will start.
 
  #7  
Old 10-31-2019, 05:48 AM
mollusc's Avatar
TReK
Join Date: Nov 2015
Location: Staten Island, NY
Posts: 3,431
Received 787 Likes on 654 Posts
Default

did you press the inertia switch, just in case?
 
  #8  
Old 10-31-2019, 01:33 PM
Chrisb_official's Avatar
4wd Low
Thread Starter
Join Date: Oct 2019
Posts: 10
Likes: 0
Received 1 Like on 1 Post
Default

Hey i tried the unlock 3 times still nothing, also tried to EKA the rover but on the first attempt, I didn't get the horn sound and it didn't take the code. maybe im doing it wrong, any thpughts or ideas?

I will try the inertia switch n report back...
 
  #9  
Old 10-31-2019, 05:44 PM
Extinct's Avatar
Camel Trophy
Join Date: Feb 2013
Location: Lynchburg VA
Posts: 4,565
Received 1,508 Likes on 1,068 Posts
Default

Does the key fob work? If so try the lock/unlock.
 
  #10  
Old 10-31-2019, 05:59 PM
Chrisb_official's Avatar
4wd Low
Thread Starter
Join Date: Oct 2019
Posts: 10
Likes: 0
Received 1 Like on 1 Post
Default

Hey EX, yes it works & tried it, still nothing...
 


Quick Reply: Landrover D2 wont start.. .



All times are GMT -5. The time now is 01:17 AM.