Nitto Trail Grappler on a DII
#1
Nitto Trail Grappler on a DII
Have an Old Man Emu 2" lift and currently running 265/60/18 (30.5 inches x 10.43" wide) on stock wheels. Wanting the Nitto Trail Grapplers as they are really good looking but still perform OK on the highway. They are kinda midway between an AT and MT. The smallest size they have is the 275/70/18 (33.62" x 11.1 wide). What mods if any would I have to make to keep these from rubbing or are they simply just too big. I know about the gearing, gas and torque issues. Just wondering about the rubbing issues and whether it is possible.
#3
I have the cooper stt tires in a 275/70/18 and they rub when I fully turn left or right. I'm going to buy some spacers to fix that. The only difference between the two of us if that I've got a 3 inch lift instead of 2. In my experience, I've had no issues with torque or gearing, that stuff is over exaggerated on these boards. The only thing that I lost was my mpg's. And I do believe it is a 33.2, but going from a 31, to a 32, to a 33 I've only noticed the mileage
Metric to Standard Result:
275/70/18 = 33.2x10.8/18
Metric to Standard Result:
275/70/18 = 33.2x10.8/18
Last edited by shady milkman; 12-09-2013 at 09:18 PM.
#4
Thread
Thread Starter
Forum
Replies
Last Post
PostRelease
Discovery II
0
09-14-2009 08:59 PM
PostRelease
General Range Rover Discussion - Archived
0
07-02-2009 12:00 PM