Would that be for the rear r/h sensor? From what I saw yesterday it all looked good (at all 4), but I will double check it.
Thanks

 

Thanks for all the help, I have to go to the field for a few days, I'll check back Thurs/Fri and see what has come up.
Thanks again
Rob

 

Passenger front= Bank 2 sensor 1 (low voltage)

 

Alright, this morning came out to a P0174, too lean code, cleared it and no more SES light. Ran live data on my scanner while driving and had the following for the O2S:
O2S B1S1 (v)- 0.55 varying to 0.800
STFT B1S1 (%)-0 varying to 3.7
O2S B1S2 (v)-0.445
O2S B1S2 (%)-NA
O2S B2S1(v)-0.035 varying to 0.050
O2S B2S1(%)-25.0, would vary from 0-25
O2S B2S2(v)-0.445
O2S B2S2(%)-NA
These were as best I could tell while driving/idling, the scanner also ended up with a P0150 code but no SES light.
Any help would be great!!!
Thanks

 

Does anyone know someone that might be able to tell me what thesse numbers for the O2S should be. B2S1 seems off compared to the others.

 

Read my reply on the LRO and see if you can get Elemental to reply to you, he can get very specific.

 

Done

 

put truck ignition to accessory (didn't start) and had the 150 code today. Haven't driven it since Fri, interesting???