Product feedback needed.
#11
11-02-2018 | 06:14 PM
TReK
Joined: Nov 2015
Posts: 3,458
Likes: 804
From: Staten Island, NY
#12
11-02-2018 | 06:29 PM
Thread Starter
|
Baja
Joined: Aug 2013
Posts: 6,729
Likes: 722
From: Huntington Beach CA
#13
11-02-2018 | 06:30 PM
Thread Starter
|
Baja
Joined: Aug 2013
Posts: 6,729
Likes: 722
From: Huntington Beach CA
Intake tubes went on sale months ago.
https://landroverforums.com/forum/di...ube-kit-90285/
https://landroverforums.com/forum/di...ube-kit-90285/
#14
11-02-2018 | 06:34 PM
Thread Starter
|
Baja
Joined: Aug 2013
Posts: 6,729
Likes: 722
From: Huntington Beach CA
These should be available in 2-3 months, tops. Need to install and test. Then decide on color.
As mentioned, these will be bundled with the bleeder T, but we might bring a few in without the T.
Still working on cost. Our goal would be $250 ish, with the T.
Problem is, duty rates have jumped on Automotive parts...
As mentioned, these will be bundled with the bleeder T, but we might bring a few in without the T.
Still working on cost. Our goal would be $250 ish, with the T.
Problem is, duty rates have jumped on Automotive parts...
#16
11-02-2018 | 07:12 PM
Rock Crawling
Joined: Jun 2016
Posts: 374
Likes: 66
From: Virginia
#17
11-02-2018 | 08:13 PM
Thread Starter
|
Baja
Joined: Aug 2013
Posts: 6,729
Likes: 722
From: Huntington Beach CA
Would the caps be compatible with an OEM cap in a pinch? If not, could an additional cap be ordered in case the seals were to fail many years down the road? I would assume they were the same as a factory cap to preserve the ability to pressure test the system as well. Just curious...
#18
11-02-2018 | 08:17 PM
I know from years of anodized aluminum parts that the colors fade eventually. Silver always turns out looking the best in the long run. Cap style wise I thought I saw a pressure tester adapter that mounted on older style radiators that used the old school STANT radiator caps. I'll have to see if I can track it down.
