ProShaft Front Drive Shaft
#131
OK, since you sort of asked nice:
Rear Prop Shaft Bush - Land Rover Forums : Land Rover and Range Rover Forum
Rear Prop Shaft Bush - Land Rover Forums : Land Rover and Range Rover Forum
#132
Driveshaft Rubber Coupling (Part # TVF100010) - Land Rover driveshafts from Atlantic British
If you buy a rotoflex with the full hardware kit, the center bushing usually comes with it. See the photo in the link above.
If you buy a rotoflex with the full hardware kit, the center bushing usually comes with it. See the photo in the link above.
Ironically I already purchased the rubber coupling kit from AB and received it in the mail. Just did not know what each part in the kit was called. I even called AB again to inquire about any centering kit on the rear propshaft and they were clueless. Thank you so much Jafir. I think it would have helped if I specified the rear propshaft to. Im not concerned about the front because I already ordered one from Justin and it should arrive on my door tomorrow.
Thanks again all.
#133
How does that old proverb go, "Give a man a link and he will repair his Rover for a day, teach a man to use Search and he will repair his Rover for a lifetime."
#134
Back to the topic at hand: Just received Justins propshaft in the mail. Ordered an extra set of ny-lock nuts for the rear shaft. On first impression it looks well built and greased considerably (which is good in my book). Looks to have 5 grease nipples, although the nipple on the shaft itself looks either smashed or just a different type of grease fitting (not really sure). So far no complaints and if weather permits this weekend I will install it on my truck.
Below is the nipple that looks either broken or like a different type of grease fitting.
Below I moved the double carden section as close to the grease fittings as possible to ensure that the nipples where not at risk of being crushed when the shaft moves around. There is enough clearance that the nipples are free of any contact with the enclosing sections of the carden.
Below is the recessed grease fitting. I'm gonna buy the needle grease gun tip this coming week from autozone so I can reach this fitting in the future
Below is the nipple that looks either broken or like a different type of grease fitting.
Below I moved the double carden section as close to the grease fittings as possible to ensure that the nipples where not at risk of being crushed when the shaft moves around. There is enough clearance that the nipples are free of any contact with the enclosing sections of the carden.
Below is the recessed grease fitting. I'm gonna buy the needle grease gun tip this coming week from autozone so I can reach this fitting in the future
#136
#140
I'm using the latest version of firefox and all my adobe products are up to date (flash, shockwave, air, reader) as is my java.