Had to be away doing family things but I am back. I want it clear I have no yellow dash light on. The TC light comes on when the ECU activates the left front brake. But after I let off the gas the brake releases as well as the TC. There is no wheel spinning code. light going off. I made up in my own mind about the ECM sees the wheel spinning so applies the brake to transfer power to the other wheel. Deputy I hope I did a number 4 because that would be an easy fix. I made a mistake once before-----I thought I had made a mistake but I didn't! (JOKE). I am going to compare spinning voltage on both front tires tomorrow morning.

 

Well I decided to bight the bullet and bought some expensive wheel hubs. I measured the AC voltage and they were pretty close to what the original hubs were. I drove it today, the brakes did not come on. But all the Amigo lights are back on. The cheap hubs from Amazon, the sensors did not work.

 

Would be interesting to get the codes read.

 

Back from the the Holiday. Now I'm in snow removal mode so I have not got to put any serious miles on the Land Rover but the three amigo lights are off. We have 18 inches of snow and the Rover has good aggressive tires so maybe I will try it out in the snow and see if it compares to my Land Cruiser.