The wiper shroud on the bottom of my windshield has pulled away in a couple of areas. Consequently, water is getting in and soaking my floor boards. Does anyone know of a technique to seal the shroud without going through the expense of replacement? Thanks!

 

Pretty sure your windshield is leaking on the bottom. Regardless of the plastic piece on the bottom, it shouldn't leak. I would pull it off and re-seal the bottom, then re-attach the trim piece. Or you can take it to a glass shop and have them look at it.

 

Great advice. I am going to check to see if the shroud removal is covered on the RAVE CD. Thanks!

 

it is. all glass is covered in a section

 

Check your ac drains if you have not yet.