Window lift ECU solder??
#1
Window lift ECU solder??
I made a new thread because I know alot of times people dont go review the old ones.
I got my Window Lift ECU out after some battle..
Now the dark spot I take it is where I solder.. I put the solder into the hole and then melt it correct?? It doesnt look like there was ever any solder there..
http://i168.photobucket.com/albums/u...e/DSC00566.jpg
http://i168.photobucket.com/albums/u...e/DSC00569.jpg
I got my Window Lift ECU out after some battle..
Now the dark spot I take it is where I solder.. I put the solder into the hole and then melt it correct?? It doesnt look like there was ever any solder there..
http://i168.photobucket.com/albums/u...e/DSC00566.jpg
http://i168.photobucket.com/albums/u...e/DSC00569.jpg
Last edited by llPANCHOll; 07-13-2009 at 12:55 PM.
#3
#5
Nope.. no pin, I am getting intermittant rear windows.. sometimes they work, sometimes they dont..
OK.. actually I think the solder is bad.. Its very hard to see, allmost imperceptible to my eyes, but I can see it in this photo and as soon as I put the heat to the pin it was appearant the the solder was coming loose.. Wil reinstall and see what happens..
OK.. actually I think the solder is bad.. Its very hard to see, allmost imperceptible to my eyes, but I can see it in this photo and as soon as I put the heat to the pin it was appearant the the solder was coming loose.. Wil reinstall and see what happens..
#8
Jesus Mary and Joseph....
Got it back in, but let me tell you, this project is not for the faint of heart, or someone with little patience, I am a small guy and I had a hard time getting my hands back into the glovebox area to fiddle with this stuff. Broke the face plate trying to get it back on, so it looks like its time to break out the trusty Electrical Tape.. Bummer thing is the whole enchillada sets in a box that is leaning down, so I am concered that he damn circuitboard will try to slide out of its box and be crushed everytime I open and close the glove box.
Got it back in, but let me tell you, this project is not for the faint of heart, or someone with little patience, I am a small guy and I had a hard time getting my hands back into the glovebox area to fiddle with this stuff. Broke the face plate trying to get it back on, so it looks like its time to break out the trusty Electrical Tape.. Bummer thing is the whole enchillada sets in a box that is leaning down, so I am concered that he damn circuitboard will try to slide out of its box and be crushed everytime I open and close the glove box.