Wiring Aftermarket radio in, having trouble.
#31
I know this is an old thread, but I wanted to thank Joemamma1954. I grabbed a Metra harness out of a junk yard D2. It didn't have the RCA's on it, but it was 2.00 so I wasn't to worried if it didn't work. I matched up all the wiring and I knew the Blue/White wire from the new stereo would power the stock D2 amp. The junk yard harness had an orange/white wire and all I had to do was move it from it's spot to the Red/Blue OEM wire. Powers up the AMP, and honestly my sound isn't distorted at all and it sounds great. Some slight hiss when the volume is all the way down, so I'll try a better ground, but it's not getting any alternator whine and once up past 5 volume the hiss is completely gone.
Thanks again for the Red/Blue wire info!
Thanks again for the Red/Blue wire info!
Noise is being amplified. You need to dumb down the output from HU.
#32
Thread
Thread Starter
Forum
Replies
Last Post
twilightcall
Discovery II
3
03-06-2012 03:11 PM