ABS Pump Replacement
#1
06-23-2010 | 08:11 PM
Thread Starter
|
2nd Gear
Joined: Mar 2008
Posts: 2
Likes: 0
ABS Pump Replacement
Hi All,
I recently had the abs, brake, and TC lights come on. It ended up being the ABS pump. The replacement was straight forward. Here's my question. Why is my brake pedal still going to the floor where I have to pump them 2 times to stop. Do I need to bleed the pump or the brakes? I have no lights on my dash since replacing it. Just wondering...
I recently had the abs, brake, and TC lights come on. It ended up being the ABS pump. The replacement was straight forward. Here's my question. Why is my brake pedal still going to the floor where I have to pump them 2 times to stop. Do I need to bleed the pump or the brakes? I have no lights on my dash since replacing it. Just wondering...
#3
06-24-2010 | 12:37 AM
Pro Wrench
Joined: Feb 2008
Posts: 1,706
Likes: 3
From: Meridian, Idaho
Sounds like there is a bunch of air in the system. Here is the proceedure: http://www.rangerovers.net/maintenance/brakebleed4.html
Thread
Thread Starter
Forum
Replies
Last Post
Second2None
General Tech Help
3
12-06-2010 05:26 PM
jy3
General Tech Help
1
06-04-2009 02:50 AM
2000, abs, ads, brake, instalation, instructions, land, problems, pump, range, repair, replace, replacement, rover, unit
