General Range Rover Discussion - Archived Archived threads for all Range Rover discussions.
Sponsored by:
Sponsored by:

o2 Sensor voltage operation

Thread Tools
 
Search this Thread
 
Old Jul 23, 2014 | 08:14 PM
  #1  
tomrover's Avatar
Thread Starter
|
2nd Gear
Joined: Nov 2008
Posts: 2
Likes: 0
Default o2 Sensor voltage operation

1997 P38 GEMS

Just replaced one of the post cat o2 sensors as it was outputing 1.020 volts (as if it wasn't connected at all) with no change at all.

Looked at the other three and I see this:

bank 1 sens 1: fluctuates as low as 0.02 up to 0.980
bank 1 sens 2: stays consistently at 0.900 and 0.960

bank 2 sens 1: stays consistently between 0.900 and 0.960
bank 2 sens 2: stays consistently between 0.900 and 0.960 (after replacement)


Needless to say my car is running rich as all hell and the long term fuel trims are both -17.2.

I'm thinking bank 1 sens 1 is out of whack as it is the one that is the outlier, [B]can anyone confirm?[B]

Much appreciated
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Richard.rover
Discovery II
5
Jan 17, 2022 03:49 PM
LRD2&ME
Discovery I
10
Jan 25, 2015 01:58 PM
willys_49
General Tech Help
2
Nov 11, 2012 02:04 PM
LRD2&ME
Discovery I
2
Jul 8, 2011 07:16 PM
vjm530
General Range Rover Discussion - Archived
3
Jul 7, 2008 08:19 PM




All times are GMT -5. The time now is 10:12 AM.