Stopped while driving my into my driveway from work. Pushed to the house. No Spark to the plugs.

Changed all the fuses, verified the fule cuyoff switch was ok. Replaces the cam shaft sensor.

Still, enging turns over but no fuel pressures or spart at the plug. (bypassed the relay for fuel pump and it worked.)

I wiil not start... Anyother ideas...

John

 

If the engine light is on you can see what codes come up, that might tell you what the problem is. Is that a 2001 DII? I see you put 91DII

Willie

 

Yes, it a 2001. (I have a 1991 BMW as well I corrected the heading). Anyway, no codes. Engine turns over well. Replaced cam shaft, and crank shaft sensor.

I by passed the fuel pump relay to make sure the fuel pump was working.

When turning the key to the on position I still do not get any fuel pressure. Or the fuel relay is is not being activated. Goes with no spark firing.

Just can not figure what it could be.

JR

 

Have you reset the roll over switch on the passenger firewall?

 

Yes, tested the roll over switch. Verified by testing the current/voltage through the switch. It is pushed and closed.

JR