i was recently wading through about 12 inches of water and after i got out of the water the rover stalled and wont start. it is still back in the woods. the air filter was bone dry and the distributer was dry from what i could see without taking the cap off, it trys to start, the engine is cranking or turning but it wont fire.( yes there is gas) one time it was real foggy and rainy and the rover wouldnt start until the nextday!PLEASE HELP THIS HAPPEND 2/23/09

 

You were in more then 12"s of water.
Sounds like your ECU got wet and that will need to be removed/cleaned and dried out before you can restart your truck.

 

yeah your right it was pretty deep. thanks for your help i will check it out.