I attached a video by Atlantic British below that shows two tools that assist with the install and fit of the seal at the bottom of the Bosh injectors for a 5.0. I called Atlantic British and they do not supply the tools and the tech in the video cannot be reached. I had no success through a long search finding these two tool items. Does anyone know who is a provider for the injector seal install and fitting tools? Thanks, Wolf.

 

Have you checked with Snap-On, MAC, and MATCO

 

Snap-On yes but no luck. I will check the others. Thx.

 

After assistance from Freedom Racing they identified the installer as 310-198 Injector Teflon Seal installer, and the 310-199 Injector Teflon Seal Calibration Tool. They have them but they are out of stock and will not have any until 9/16. I called every supplier that I could find on the web that carried these two items and the installer is plenty available, but the calibration tool everyone presently have on back ordered until late August or early Sept. Just not getting any luck with this.

 

Someone is asleep at the wheel at AB, the FI removal tool is FIT50 (their #) > https://www.roverparts.com/Parts/FIT50
> https://www.roverparts.com/Parts/FIT50

There are many versions of that tool.
For example the Assenmacher JLR0197 > https://asttool.com/detail_page.php?tool_number=JLR%200197
> https://www.wiseautotools.com/AHJLR0...jector-Puller/

Or The Baum BJAG310-197 > https://www.toolsource.com/fuel-inje...-p-242833.html

The SEAL Install Tool is Assenmacher #: JLR 9899 > https://www.asttool.com/detail_page....ber=JLR%209899
> https://www.wiseautotools.com/AHJLR9...nd-Rover-Fuel/

Just SEARCH the part numbers and I'm sure you can find even better prices online.

 

Thank you!! I made purchase and on its way.

 

Try Freedom Racing & Tool 641-784-8665. I just bought them last week. ST-243 calibration tool ST236 seal guide installer. Got any ideas for the process of removing the fuel rail retaining clips?