Castor over correction? Trying to learn.
Thread Starter
|
Recovery Vehicle
Joined: Dec 2008
Posts: 1,025
Likes: 38
From: North Georgia
Castor over correction? Trying to learn.
what would happen if you over correct castor.
Let's say you install a 2" lift, and people recommend 3 degree castor correction.
What happens if you go 6 degrees?
Let's say you install a 2" lift, and people recommend 3 degree castor correction.
What happens if you go 6 degrees?
Super Moderator
Joined: Jul 2013
Posts: 5,794
Likes: 211
From: dallas texas
The goal is to optimize angles and stay true to form. We don't want any vibration or extra strain.
3 is pretty close to your needs, with 2". 6 is close to angling you the other way. I'm at 6 degree with near 5". I actually cut my wrist off and welded at desired position. Figured from there and had some made up. 6 was close.
3 is pretty close to your needs, with 2". 6 is close to angling you the other way. I'm at 6 degree with near 5". I actually cut my wrist off and welded at desired position. Figured from there and had some made up. 6 was close.
Last edited by dusty1; Jan 30, 2015 at 07:46 AM.
Thread
Thread Starter
Forum
Replies
Last Post
SolbergFanBoi
Discovery II
7
Mar 5, 2012 07:05 PM