Disco 1 Front Window issue
#1
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
Hello all,
I've read about the fix for the Disco 1 rear window problem, that is to re-solder the cold spots on the ECU behind the glove box, but I was wondering if this also controls the front windows? The window has been acting up, and now it is down and won't go up. I tried switching the switches, still no go. Then last night when it was really quiet, when I tried I heard a definite clicking sound behind the glove box when I pressed the switch to raise the window.
Do you think this is the problem area? Or is there just a relay clicking behind the glove box? Any help appreciated.
I've read about the fix for the Disco 1 rear window problem, that is to re-solder the cold spots on the ECU behind the glove box, but I was wondering if this also controls the front windows? The window has been acting up, and now it is down and won't go up. I tried switching the switches, still no go. Then last night when it was really quiet, when I tried I heard a definite clicking sound behind the glove box when I pressed the switch to raise the window.
Do you think this is the problem area? Or is there just a relay clicking behind the glove box? Any help appreciated.
#2
![Default](https://landroverforums.com/forum/images/icons/icon1.gif)
bad solder joints...fixed it using these instructions..."Repair a Land Rover Discovery electric window ECU to make the rear windows open again"
Thread
Thread Starter
Forum
Replies
Last Post
twoxred
Discovery I
18
10-04-2021 07:07 AM
bcolins
Retired - Private 'Wanted' Classifieds
0
10-02-2008 12:36 PM