Disco 2-2001 Front drive shaft fell out, cracked transmission housing.
#11
Thank you for all the advice
Thank guys for all the advice. I will drill a 1mm hole at the top of the crack to stop this progressing and then clean and grind out the crack area and apply some sort of aluminium repair material to the crack. I am in South Africa so am not familiar with JB Weld. What should be inserted into the newly drilled hole. As this area is not under pressure could I insert a bit of aluminium epoxy putty.
#12
Thread
Thread Starter
Forum
Replies
Last Post
TripleThreat
Discovery II
8
04-12-2011 08:58 AM