i have a 96 disco. last night i was driving with my lights on pulled up at a friends house and out of no where the hazard lights started flashing. i thought i might of hit a button i pushed the button and then it showed the hazard sign on the dash pushed the button again the sign went away but hazards were still on shut the truck off and they were still on turned all lights off and still on pulled the neg battery cable and of course they turned off put cable back on and they started again i had a 10 mile drive to get home so i figured i would pull the fuse when i pulled it the lights stoped but the relay kept on ticking i started the truck the ticking stoped i figure it is a bad ground somewhere could someone please point me in the right direction to find the ground wires

thanks in advance

 

Reset the inertia switch on the firewall.
When the inertia switch is activated it sets off the hazards.

You will get TONS more hits if you post in the DI section.