General Tech Help Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.
Sponsored by:
Sponsored by: CARiD

Transmissions

Thread Tools
 
Search this Thread
 
  #1  
Old 01-07-2016 | 10:32 AM
mcabrera3's Avatar
Thread Starter
|
Three Wheeling
Joined: May 2015
Posts: 69
Likes: 0
Default Transmissions

So I have a 2003 4.6 hse land rover discovery and u want to swap out the transmission with a 2001 4.0 transmission. Is it compatible?
 
  #2  
Old 01-07-2016 | 10:34 AM
drowssap's Avatar
Baja
Joined: Feb 2011
Posts: 9,298
Likes: 317
From: Boston Strong
Default

i "believe" so but it will be 3/4 inch shorter
 
  #3  
Old 01-07-2016 | 10:35 AM
mcabrera3's Avatar
Thread Starter
|
Three Wheeling
Joined: May 2015
Posts: 69
Likes: 0
Default

Originally Posted by drowssap
i "believe" so but it will be 3/4 inch shorter
I did codes to just swap it out. Can't find the problem and mechanics down here are **** when it comes to landys
 
  #4  
Old 01-07-2016 | 11:00 AM
drowssap's Avatar
Baja
Joined: Feb 2011
Posts: 9,298
Likes: 317
From: Boston Strong
Default

the unit in the 03/04 was slightly beefier than the 00-02 units, but i think it only came out to approx. 3/4 of an inch longer.
i would assume you would be using the 03 drive shaft and cross member. I would check with of of the sites parters to be sure
 
  #5  
Old 01-07-2016 | 11:02 AM
mcabrera3's Avatar
Thread Starter
|
Three Wheeling
Joined: May 2015
Posts: 69
Likes: 0
Default

Originally Posted by drowssap
the unit in the 03/04 was slightly beefier than the 00-02 units, but i think it only came out to approx. 3/4 of an inch longer.
i would assume you would be using the 03 drive shaft and cross member. I would check with of of the sites parters to be sure
Hey I got my hand on a 03 buy 4.0 think it'll work?? Mine is a 4.6
 
  #6  
Old 01-07-2016 | 08:17 PM
chubbs878's Avatar
Pro Wrench
Joined: Apr 2015
Posts: 1,387
Likes: 111
From: Dallas, TX
Default

There were no 4.0 in the 2003. The 2003 and 2004 are nearly identical except for the transfer case. You can exchange anything between these 2 year models. Somebody tell me if I'm wrong
 
  #7  
Old 01-07-2016 | 08:26 PM
chubbs878's Avatar
Pro Wrench
Joined: Apr 2015
Posts: 1,387
Likes: 111
From: Dallas, TX
Default

Originally Posted by mcabrera3
Hey I got my hand on a 03 buy 4.0 think it'll work?? Mine is a 4.6
search for a transmission from a 2003 OR a 2004. They are very plentiful and no more than $300 for even a low-mileage unit and that price includes shipping.
 

Last edited by chubbs878; 01-07-2016 at 08:30 PM.
  #8  
Old 01-08-2016 | 10:03 AM
binvanna's Avatar
Winching
Joined: Oct 2012
Posts: 676
Likes: 43
Default

Pretty sure the difference is just the torque converter. I think Ashcroft's website has more details.
 
  #9  
Old 01-08-2016 | 02:10 PM
chubbs878's Avatar
Pro Wrench
Joined: Apr 2015
Posts: 1,387
Likes: 111
From: Dallas, TX
Default

Originally Posted by binvanna
Pretty sure the difference is just the torque converter. I think Ashcroft's website has more details.
Even minute as that would be, couldn't make a difference.
 
  #10  
Old 01-12-2016 | 02:15 PM
mcabrera3's Avatar
Thread Starter
|
Three Wheeling
Joined: May 2015
Posts: 69
Likes: 0
Default

Originally Posted by drowssap
the unit in the 03/04 was slightly beefier than the 00-02 units, but i think it only came out to approx. 3/4 of an inch longer.
i would assume you would be using the 03 drive shaft and cross member. I would check with of of the sites parters to be sure
Hey drowssap so do you think a 02 transmission can work on a 03? Turns out the junkyard owner thought it was a 03 but as I was removing it I was the cdl nipple and I ran the vin and it's a 2003. It's just a little shorter so we can just buy a longer drive shaft???

P.S. thanks a lot man!!
 


Quick Reply: Transmissions



All times are GMT -5. The time now is 07:13 AM.