LR3 Talk about the Land Rover LR3 within.
Sponsored by:
Sponsored by:

2007 Land Rover lr3 ( suspension problem)

Thread Tools
 
Search this Thread
 
Old Mar 22, 2018 | 10:01 PM
  #1  
Fahadazim's Avatar
Thread Starter
|
7th Gear
Joined: Mar 2018
Posts: 7
Likes: 0
Default 2007 Land Rover lr3 ( suspension problem)

Hi all, I need some help with my lr3, suspension, I have already changed air ride compressor, and also cleaned rear block valve,
suspention light comes on when it try to release pressure
 
Reply
Old Mar 22, 2018 | 11:07 PM
  #2  
abran's Avatar
Baja
Joined: Aug 2013
Posts: 6,900
Likes: 789
From: Huntington Beach CA
Default

What’s the exact codes? What compressor did you install, new or rebuilt?
 
Reply
Old Mar 22, 2018 | 11:09 PM
  #3  
Fahadazim's Avatar
Thread Starter
|
7th Gear
Joined: Mar 2018
Posts: 7
Likes: 0
Default

Originally Posted by abran
What’s the exact codes? What compressor did you install, new or rebuilt?
it’s a brand new compressor,
code : pressure does not decrease when venting gallery
 
Reply
Old Mar 23, 2018 | 07:34 AM
  #4  
abran's Avatar
Baja
Joined: Aug 2013
Posts: 6,900
Likes: 789
From: Huntington Beach CA
Default

Exhaust valve on compressor is bad.

What brand? Return it
 
Reply
Old Mar 23, 2018 | 08:04 AM
  #5  
Fahadazim's Avatar
Thread Starter
|
7th Gear
Joined: Mar 2018
Posts: 7
Likes: 0
Default

If I leave my drive’s door open and start the car, then compressor turns on, I let it run until it fill up the reservoir, then I close the door and rais the vehicle to off-road position then I bring it back to standard height And it comes to normal height with no problem, but when u drive after 10 some time 20 kms it come back or if I shut off the car few time let it sit for more then half hour light will come back,
i also notic if we drive 2 or 3 days with light on, without filling up the reservoir , front of the vehicle goes down but rear stays up
 
Reply
Old Mar 23, 2018 | 08:23 AM
  #6  
abran's Avatar
Baja
Joined: Aug 2013
Posts: 6,900
Likes: 789
From: Huntington Beach CA
Default

So you have a leak at the front and your new compressor is defective.

What brand is the compressor?
 
Reply
Old Mar 23, 2018 | 08:25 AM
  #7  
Fahadazim's Avatar
Thread Starter
|
7th Gear
Joined: Mar 2018
Posts: 7
Likes: 0
Default

I don’t remember the brand but I will check it
 
Reply
Old Mar 23, 2018 | 11:43 AM
  #8  
houm_wa's Avatar
Camel Trophy
Joined: Apr 2009
Posts: 4,244
Likes: 482
From: North of Seattle
Default

There was a recent software upgrade...can cause faults like this. If it's an AMK compressor, you might want to get that software patch.
 
Reply
Old Mar 23, 2018 | 02:40 PM
  #9  
Fahadazim's Avatar
Thread Starter
|
7th Gear
Joined: Mar 2018
Posts: 7
Likes: 0
Default

I found out it’s a hitachi
 
Reply
Old Mar 23, 2018 | 03:07 PM
  #10  
abran's Avatar
Baja
Joined: Aug 2013
Posts: 6,900
Likes: 789
From: Huntington Beach CA
Default

I would return under warranty.
 
Reply



All times are GMT -5. The time now is 09:29 AM.